True Radius Applications
True Radius Casing Flexibility Range
| 1. |
Diameters 1'/6" - 3'/0" will expand 4" and contract 2" if the profile is not
larger than 3/4" X 3-1/2" (larger size profiles will restrict flexibility for diameters
within this range).
|
| 2. |
Diameters 4'/0"and larger will expand 10" and contract 6" if the molding profile is not larger than 3/4" X 3-1/2" (larger profiles will restrict flexibility for diameters within this range). |
Pre-forming Limitations
| 1. |
Minimum D 4'/0" (24" radius) if the profile is 6" to 8" wide.
|
| 2. |
Minimum D 3'/0" (18" radius) if the profile is 5" to 6" wide.
|
| 3. |
Minimum D 2'/4" (14" radius) if the profile is 3’/2" to 5" wide
|
| 4. |
Minimum D 1'/6" (9" radius) if the profile is 2" to 3’/2" wide
|
Special Instructions
| 1. |
Provide a molding placement drawing if application is not typical.
|
| 2. |
To order true radius casing with straight legs, refer to how to order "Odd Casing" Specials. |
 |
 |
Half circles:
Diameter" x 2 = MATERIAL LENGTH |
Quarter circles:
Radius" x 2 = MATERIAL LENGTH |
| |
|
 |
 |
Full circles:
Diameter" x 4 = MATERIAL LENGTH |
Arc Eyebrows:
Rise" x 3 + width = MATERIAL LENGTH |
| |
|
 |
 |
Round OSR Radius Crowns:
Application (quarter circle, half circle, three-quarter circle, full circle) add two feet
= MATERIAL LENGTH |
Dormer and ISR Radius Crowns:
Diameter" convert to radius application (quarter circle, half circle, full circle)
= MATERIAL LENGTH
IMPORTANT!! Specify Dormer if it's a dormer application |
| |
|
|
